What keeps me motivated to create art? New products!
For March, Nat asked us to think about what motivates us.
I’m motivated by sooooo much: a shadow on the sidewalk, a pretty leaf changing
colors, buds beginning to grow, architectural details on my daily walk, and
advertising I see on a billboard or in a magazine. But, one thing that really
gets me percolating with ideas is discovering a new product. Often, it’s a new
stencil or stamp. But my latest discovery is something I totally missed in my
childhood: shrinky dinks! One of my artist friends included a few sheets in a
recent package, and I have to say, I’m addicted. It is so magical to watch it
suddenly start to shrivel and buckle and turn into a miniature piece of art in
minutes.
When I got the shrinky dink film, I thought, “Let me test
that beautiful fan-shaped Van Vorst art foamie and see what happens.” It
printed beautifully on the film using black Archival ink. I also tested a few
stamps and stencils with both ink and acrylic paint.
I punched holes in the top center of all the stamped,
stenciled and painted pieces with the idea of using them in the future to make
jewelry. I heated the oven, put in my shrinky dinks, and waited for the magic.
Once the stamped film had shrunk, flattened, and cooled I
painted the back of the shrunken Van Vorst pieces with white acrylic. It looked
fine without painting the back, but I wanted to make the design pop a little
more.
I got out my jewelry-making components and tools and
rummaged around in my containers to find some earring wires that would work
with the stamped design. I also selected a small silver ring to connect the fan
design to the earring wire.
Carefully, I opened the small, round ring and threaded it
through the fan and the hole on the earring wire, then closed it with my
jewelry pliers.
Take a look at the final earrings with the art foamies fan
stamp for comparison. The design shrunk to about one quarter to one third of
its original size, and also got much thicker. The details of the design were
even more crisp and clear.
Here’s the “how-to” steps:
1-carefully stamp the chosen design onto the shrink film.
Press carefully, being careful not to slide the stamp. Lift the stamp straight
up to avoid smearing.
2-cut the shape out with scissors. I cut close to the design
edge, but you can also leave a little border.
3-punch a ¼” round hole near the top of the earring so that
you can attach the earring wire or a jump-ring loop. (It will look way too big
but once it shrinks the hole will be just the perfect size.)
NOTE: Be very careful when you cut and punch so that the ink
does not smear. Hold the stamped design by the edges only.
4-bake in the oven or a toaster oven according to the
directions on the shrink film package until the design shrinks. It will cool
quickly. If your piece looks curved or buckled, quickly flatten with a spatula.
Once it is fully cooled you cannot reheat to take out any curve or buckle.
5-attach earring components to shrinky dink artwork and,
viola! You’re done.
You can also use the shrink film to make necklaces or
pins—the possibilities are endless!
No comments:
Post a Comment